cortex m3 LPC1768
Added: (Thu Feb 02 2012)
Pressbox (Press Release) -
LPC1768 HPLUS T is a combo pack available with LPC1768 HPlus and 3.2nch TFT . This board has connectivity features for Micro SDCard, Ethernet, USB Host and USB Device, etc. The TFT display is SPI Compatible. A 14 pin box connector is provided for the TFT.
LPC1768 HPLUS T Features
USB Device and Host Connectivity Options.
Ethernet with DP83848 PHY MAC.
SDCard (Micro) Interface.
Analog input via ADC0.5
I/O pinout for different interfaces.
OnBoard Reset and ISP Switches.
On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
On Board 12 MHz Clock
32.768 KHz Clock for RTC.
Option for a CMOS Battery.
Onboard 20 pin JTAG connector for debugging/programming applications.
On board TFT Connector for 3.2inch TFT.
LED for Power Supply, USB, Ethernet and Test LED.
3.2 Inch TFT Features
Display Mode: Normally White Transimissive Type
Driver IC: SPFD5408 / ILI9325
Interface : SPI.
Viewing Direction : 9.0" clock.
Number of Pixels: 240 x 320
Features of LPC1768
Best in class Cortex M3 Hardware.
100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash.
8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins.